Shipulski On Design

Archive for the ‘Fear’ Category

We’ve been sufficiently polluted by lean and Six Sigma, and it’s time for them to go.

Masquerading as maximizers, these minimizers-in-sheep’s-clothing have done deep harm. Though Six Sigma is almost dead (it’s been irrelevant for some time now), it has made a lasting mark. Billed as a profit maximizer, it categorically rejects maximization. In truth, it’s a variation minimizer and difference reducer.  If it deviates, Six Sigma cuts its head off. Certainly this has a place in process control, but not in thinking control. But that’s exactly what’s happened. Six Sigma minimization has slithered off the manufacturing floor and created a culture of convergence. If your thinking is different, Six Sigma will clip it for you.

Lean is worse. All the buzz around lean is about maximizing throughput, but it doesn’t do that. It minimizes waste. But far worse is lean’s standard work. Minimize the difference among peoples’ work; make them do it the same; make the factory the same, regardless of the continent. All good on the factory floor, but lean’s minimization mania has spread like the plague and created a culture of convergence in its wake. And that’s the problem – lean’s minimization-standardization mantra has created a culture of convergence. If your thinking doesn’t fit in, lean will stomp it into place.

We need maximization at the expense of minimization, and divergence before convergence. We need creativity and innovation. But with Six Sigmaphiles and lean zealots running the show, maximization is little understood and divergence is a swear.

First we must educate on maximization. Maximization creates something that had not existed, while minimization reduces what is. Where Six Sigma minimization converges on the known right answer, creativity and innovation diverge to define a new question. The acid test: if you’re improving something you’re minimizing; if you’re inventing something you’re maximizing.

Like with He Who Shall Not Be Named, it’s not safe to say “diverge” out loud, because if you do, the lean Dementors will be called to suck out your soul. But, don’t despair – the talisman of guided divergence can save you.

With guided divergence, a team is given a creatively constructed set of constraints and very little time (hours) to come up with divergent ideas. The constraints guide the creativity (on target), and the tight timeline limits the risk – a small resource commitment. (Though counterintuitive, the tight timeline also creates remarkable innovation productivity.) Done in sets, several guided divergence sessions can cover a lot of ground in little time.

And the focused/constrained nature of guided divergence appeals to our minimization bias, and makes it okay to try a little divergence. We feel safe because we’re deviating only a little and only for a short time.

Lean and Six Sigma have served us well, and they still have their place. (Except for Six Sigma.) But they must be barred from creativity sessions and front end innovation, because here, divergence carries the day.

Today’s answer to everything is process and tools. Define the desired outcome; create the process; create the tools.  Problem solved.

But if the desired outcome is lasting change, deterministic processes and static tools won’t get us there.  Lasting change comes from people and their behavior.

Going forward, instead of creating process, create an environment of trust so people will investigate the unfamiliar; and instead of creating tools, create time – time for people to prototype the unfamiliar.

There will always be more work than time – no choice there. But, you can choose your mindset. You can choose to be overwhelmed; you can complain; and you can feel bad for yourself. You can also choose to invert it – you only work on vital projects because less important ones aren’t worth your time. Inverted, work is prioritized to make best use of your valuable time. When there’s too much work you can whine and complain, or you can value yourself – your choice

Most of us don’t choose what we work on, and sometimes it’s work we’ve done before. You can choose to look at as mind numbing tedium, or you can flip it. You can look at it as an opportunity to do your work a better way; to try a more effective approach; to invent something new. With repeat work you can dull it down or try to shine – your choice.

Sometimes we’re asked to do new and challenging work. You can choose to be afraid; you can make excuses; and you can call in sick for the next month. Or you can twist it to your advantage and see it as an opportunity to stretch. With challenging work you can stunt yourself or grow – your choice.

Negativity repels and positivity attracts – it’s time for you to choose.

This week my son made a difficult choice – he chose between two things he loves.

The easy choice was to say yes to both, but in reality, there was not enough time. And in reality, the easy yes was a masquerade. It was really a slow, painful no with rippling consequences to his future. The tough choice did not come immediately and it did not come easy. But in the end, he was ready to make it because he saw things not as he wanted them to be, but as they were.

Once he decided he was going to choose, he had to decide which to choose. A tough choice made tougher because one is mainstream and the other on the fringe. It was clear there were far more overt repercussions with a no to the mainstream. Simply put, the powerful mainstream would not understand. But to his credit, he recognized the mainstream cares about itself, not him. Also, it was clear the fringe accepts him for him. So he sat himself in the future, figured out what was best for the soon-to-be him, and chose the fringe.

Once he decided which to chose, he had to decide how to choose. The easy choice was to slink quietly into the fringe never to be seen again. This was another masquerade. It was really an opportunity to self-devalue his decision and a setup for never ending ridicule over the remainder of his high school career. Instead, he made the tough choice to speak truth to the mainstream authority – face-to-face.

He got up early and met the coach in his office. The gist of the meeting – I’m sad, but this is my choice and why I’m choosing.

To the coach’s great credit, though disappointed, he understood and thanked Ethan for meeting face-to-face. And though emotionally wobbly after the meeting, because he declared his choice and was validated, he stood taller. And once validated by the head of the mainstream, there was no room for ridicule.

This week my son showed me what courage is. And he taught me an important lesson – tough decisions are tough, but we’re better off for making them.

I’m proud of him.

It’s easy to get caught up in what others think. (I fall into that trap myself.) And it’s often unclear when it happens. But what is clear: it’s not good for anyone.

It’s hard to be authentic, especially with the Fraternity of Team Players running the show, because, as you know, to become a member their bylaws demand you take their secret oath:

I [state your name] do solemnly swear to agree with everyone, even if I think differently. And in the name of groupthink, I will bury my original ideas so we can all get along. And when stupid decisions are made, I will do my best to overlook fundamentals and go along for the ride. And if I cannot hold my tongue, I pledge to l leave the meeting lest I utter something that makes sense. And above all, in order to preserve our founding fathers’ externally-validated sense of self, I will feign ignorance and salute consensus.

It’s not okay that the fraternity requires you check your self at the door. We need to redefine what it means to be a team player. We need to rewrite the bylaws.

I want to propose a new oath:

I [state your name] do solemnly swear to think for myself at all costs. And I swear to respect the thoughts and feelings of others, and learn through disagreement. I pledge to explain myself clearly, and back up my thoughts with data. I pledge to stand up to the loudest voice and quiet it with rational, thoughtful discussion. I vow to bring my whole self to all that I do, and to give my unique perspective so we can better see things as they are. And above all, I vow to be true to myself.

Before you’re true to your company, be true to yourself. It’s best for you, and them.

Separation of church and state, yes; separation of team player and self, no.

Engineers fear social media, but shouldn’t. Our fear comes from lack of knowledge around information flow. Because we don’t understand how information flow works, we stay away. But our fear is misplaced – with social media information flow is controllable.

For engineers, one-way communication is the best way to start. Engineers should turn on the information tap and let information flow to them. Let the learning begin.

At first, stay away from FaceBook – it’s the most social (non-work feel), least structured, and most difficult to understand – at least to me.

To start, I suggest LinkedIn – it’s the least social (most work-like) and highly controllable. It’s simple to start – create an account, populate your “resume stuff” (as little as you like) and add some connections (people you know and trust). You now have a professional network who can see your resume stuff and they can see yours. But no one else can, unless you let them. Now the fun part – find and join a working group in your interest area. A working group is group of like-minded people who create work-related discussions on a specific topic. Mine is called Systematic DFMA Deployment. You can search for a group, join (some require permission from the organizer), and start reading the discussions. The focused nature of the groups is comforting and you can read discussions without sharing any personal information. To start two-way communication, you can comment on a discussion.

After LinkedIn, engineers should try Twitter. Tweets (sounds funny, doesn’t it?) are sentences (text only) that are limited to 140 characters. With Twitter, one-way communication is the way to start – no need to share information. Just create an account and you’re ready to learn. With LinkedIn it’s about working groups, and with Twitter it’s about hashtags (#). Hashtags create focus with Twitter and make it searchable. For example, if the tweet creator uses  #DFMA in the sentences, you can find it.  Search for #DFMA and you’ll find tweets (sub-140 character sentences) related to design for manufacturing and assembly. When you find a hashtag of interest, monitor those tweets. (You can automate hashtag searches – HootSuite – but that’s for later). And when you find someone who consistently creates great content, you can follow them. Once followed, all their tweets are sent to your Twitter account (Twitter feed). To start two-way communication you can retweet (resend a tweet you like), send a direct message to someone (like a short email), or create your own tweet.

Twitter’s format comforts me – short, dense bursts of sentences and no more. Long tweets are not possible. But a tweet can contain a link to a website which points to a specific page on the web. To me it’s a great combination – short sentences that precisely point to the web.

With engineers and social media, the goal is to converge on collaboration. Ultimately, engineers move from one-way communication to two-way communication, and then to collaboration. Collaboration on LinkedIn and Twitter allows engineers to learn from (and interact with) the world’s best subject matter experts. Let me say that again – with LinkedIn and Twitter, engineers get the latest technical data, analyses, and tools from the best people in the world. And it’s all for free.

For engineers, social and media are the wrong words. For engineers, the right words are – controlled, focused, work-related information flow. And when engineers get comfortable with information flow, they’ll converge on collaboration. And with collaboration, engineers will learn from each other, help each other, innovate and, even, create personal relationships with each other.

Companies still look at social media as a waste of work time, and that’s especially true when it comes to their engineers. But that’s old thinking.  More bluntly, that’s dangerous thinking. When their engineers use social media, companies will develop better products and technologies and commercialize them faster.

Plain and simple, companies that accelerate their engineers into social media will win.

Meeting agendas are a good idea. They make clear what will happen and they’re time bound. (At least good ones.) They look forward in time and shape what will happen.

Meeting agendas are created by the organizer so others follow. It’s strange to think about, but from thin air, the organizer congers magic words on a page that shape direction. The agenda sets the agenda and it’s followed. But in truth, agendas are followed because we choose to follow.

But I want to introduce another schema – the work sets the agenda. In this parallel universe, we don’t choose to follow an agenda; we choose to do work so powerful it sets the agenda – work so dense its gravitational field pulls the organization toward it.

I can hear the moans and groans – we can’t choose the work we do. But you can – if your work is good enough. If your work is brighter than the sun, it’s undeniable and, like the sun, cannot be ignored.

I can hear the next round of moans – we can’t do work that good. But you can – if you think you can and you try. (The only way to guarantee you can’t is not to try.)

And the last round of groans – we’ll get fired if we fail. If you’ll get fired for trying to reinvent your universe, you’re working at the wrong place anyway.

If you like to follow agendas, follow them. But if you don’t, do celestial work, and set them.

The more work I do with innovation, the more I believe mindset is the most important thing.  Here’s what I believe:

Doing new doesn’t take a lot of time; it’s getting your mind ready that takes time.

Engineers must get over their fear of doing new.

Without a problem there can be no newness.

Problem definition is the most important part of problem solving.

If you believe it can work or it can’t, you’re right.

Activity is different from progress.

Thinking is progress.

In short, I believe state-of-the-art is limited by state-of-mind.

Engineers hate uncertainty. (More precisely, it scares us to death.) And our role in the company is to snuff it out at every turn, or so we think.

To shield ourselves from uncertainty, we take refuge in our analyses. We create intricate computer wizardry to calm our soles. We tell ourselves our analytic powers can stand toe-to-toe with uncertainty. Though too afraid to admit, at the deepest level we know the magic of our analytics can’t dispatch uncertainty. Like He-Who-Should-Not-Should-Be-Named, uncertainty is ever-present and all-powerful. And he last thing we want is to call it by name.

Our best feint is to kill uncertainty before it festers. As soon as uncertainty is birthed, we try slay it with our guttural chant “It won’t work, it won’t work, it won’t work”. Like Dementors, we drain peace, hope, and happiness out of the air around a new idea. We suck out every good feeling and reduce it to something like itself, but soulless. We feed on it until we’re left with nothing but the worst of the idea.¹

Insidiously, we conjure premonitions of mythical problems and predict off-axis maladies. And then we cast hexes on innovators when they don’t have answers to our irrelevant quandaries.

But our unnatural bias against uncertainty is misplaced. Without uncertainty there is no learning. Luckily, there are contrivances to battle the dark art of uncertainty.

When the engineering warlocks start their magic, ask them to be specific about their premonitions. Demand they define the problem narrowly – between two elements of the best embodiment; demand they describe the physical mechanisms behind the problem (warlocks are no match for physics); demand they define the problem narrowly in time – when the system spools up, when it slows down, just before it gets hot, right after it cools down. What the warlocks quickly learn is the problem is not the uncertainty around the new idea; the problem is the uncertainty of their knowledge. After several clashes with the talisman of physics, they take off their funny pointy hats, put away their wands, and start contributing in a constructive way. They’re now in the right frame of mind to obsolete their best work

Uncertainty is not bad. Denying it exists is bad, and pretending we can eliminate it is bad. It’s time to demonstrate Potter-like behavior and name what others dare not name.

Uncertainty, Uncertainty, Uncertainty.

 ¹ Remus Lupin

Independence for a country is about choice. A country wants to be able to make choices to better itself, to control its own destiny. A country wants to feel like it has freedom to do what it thinks is right. Hopefully, a country thinks it’s a good to provide for its citizens in a long term sense. We can disagree what is best, but a good country makes an explicit choice about what it think is right and takes responsibility for its choices. For a country, the choices should be grounded in the long term.

Independence for a company is about choice. Like a country, a company wants control over its own destiny. A company wants to feel like it has freedom to do what’s right. A company wants to decide what’s right and wants the ability to act accordingly. There are lots of management theories on what’s right, but the company wants to be able to choose. Like it or not, the company will be accountable for its choices, as measured by stock price or profit.

And with children, independence is about choice. Children, too, want control over their own destiny, but they score low on the responsibility scale. And that’s why children earn responsibility over time – get a little, don’t get hurt, and get a little more. They don’t know what’s good for them, but don’t let that get in the way of wanting control over their own destiny. That’s why parents exist.

Independence is about the ability to choose. But there’s a catch. With independence comes responsibility – responsibility for the choice. With children, there’s insufficient responsibility because they just don’t care. And with employees in a company, there’s insufficient responsibility for another reason – fear of failure. I’m not sure about countries.

Independence is a two way street – choice and responsibility. And independence is bound by constraints. (There are unalienable rights, but unconstrained independence isn’t one of them.) For more independence, push hard on constraints; for more independence, take responsibility; for more independence, make more choices (and own the consequences).

Happy Independence Day.

Starting is scary – we’re afraid to get it wrong. And we let our fear block us from starting. And that’s strange, because there’s never certainty on the right way because every situation is different. Fact is, you will be wrong, it’s just a matter of how wrong. But even the level of wrongness is not important. What’s important is starting because starting gives us the opportunity to respond to our wrongness.  And that’s the trick – our response to being wrong is progress. Start, be wrong, refocus, and go. Progress.

The biggest impediment to finishing is starting. Don’t let perfection get in the way of progress. Just start.