Shipulski On Design

Novelty, or newness, can be a great way to assess the status of things.  The level of novelty is a barometer for the level of uncertainty and unpredictability.  If you haven’t done it before, it’s novel and you should expect the work to be uncertain and unpredictable. If you’ve done it before, it’s not novel and you should expect the work to go as it did last time. But like the barometer that measures a range of atmospheric pressures and gives an indication of the weather over the next hours, novelty ranges from high to low in small increments and so does the associated weather conditions.

Barometers have a standard scale that measures pressure.  When the summer air is clear and there are no clouds, the atmospheric pressure is high and on the rise and you should put on sun screen.  When it’s hurricane season and super-low system approaches, the drops to the floor and you should evacuate.  The nice thing about barometers is they are objective. On all continents, they can objectively measure the pressure and display it. No judgement, just read the scale. And regardless of the level of pressure and the number of times they measure it, the needle matches the pressure.  No Kentucky windage.  But novelty isn’t like that.

The only way to predict how things will go based on the level of novelty is to use judgement.  There is no universal scale for novelty that works on all projects and all continents.  Evaluating the level of novelty and predicting how the projects will go requires good judgement. And the only way to develop good judgment is to use bad judgment until it gets better.

All novelty isn’t created equal. And that’s the trouble.  Some novelty has a big impact on the weather and some doesn’t.  The trick is to know the difference.  And how to tell the difference? If when you make a change in one part of the system (add novelty) and the novelty causes a big change in the function or operation of the system, that novelty is important. The system is telling you to use a light hand on the tiller. If the novelty doesn’t make much difference in system performance, drive on. The trick is to test early and often – simple tests that give thumbs-up or thumbs-down results.  And if you try to run a test and you can’t get the test to run at all, there’s a hurricane is on the horizon.

When the work is new, you don’t really know which novelty will bite you. But there’s one rule: all novelty will bite you until proven otherwise.  Make a list of the novel elements of the and test them crudely and quickly.

Comments are closed.